Ads code here

DIY Wedding Wax Paper Lanterns

Do not forget! follow DIYSelfy on facebook to get new and fresh ideas and updates everyday!

We loved these great luminaria so much that we wanted to share them with you here, too! They are so budget friendly and easy to do, and create such a nice ambiance! You don’t need to think of yourself as crafty to whip up these lanterns. If you know how to measure, cut, and iron, you can make these. And you should!


Materials:
  • Flowers and greenery
  • Heavy book
  • Paper towels
  • Waxed paper
  • Ruler
  • Craft knife (like an X-Acto)
  • Cutting board or self-healing cutting mat
  • Iron
  • Ironing board or cloth for pressing
  • Washi tape

Press Flowers and Greenery

1. Collect leaves, flowers and foliage, keeping in mind that delicate, thin leaves and petals will dry faster than thicker specimens. Put flowers, etc. in between two paper towels and place inside a heavy book to dry.


Measure and Cut Waxed Paper

2. Measure and cut four 4 ½ x 9 inch rectangles. You can adjust and make these any size you want, but I’m partial to a nice-sized cube, which makes the math easy. If you adjust, cut the rectangles twice as long as they are high, so they fold into a square.


Make Panels

3. Fold the waxed paper rectangle in half to make a square. Open square, place flower or greenery inside. Close the square so the flower is sandwiched between the two layers of waxed paper.


4. Working on an ironing board or on top of a cloth, pass an iron set to medium quickly over the waxed paper to seal. This will fuse the two layers together. Repeat until you have four finished square panels.

Assemble Lanterns

5. Lay two panels side-by-side with the edges touching. Orient the panels so the side you want to be the front of the lantern faces you (not facing the table). Cut a length of tape about an inch longer than the panel. Center the tape over where the panels meet and press in place.


6. Flip panel over and press the extra tape to the wrong side. “Hinge” panels together and run your finger along the tape to make a sharp crease. Continue joining the panels together until all four panels are taped into a cube.


7. Set candle (inside of a glass votive) or LED tealight inside the luminaria and enjoy!



via oncewed , apracticalwedding

Δημοσίευση σχολίου